Social anxiety disorder

Social anxiety disorder is also known as social phobia. Individuals with this disorder experience intense fear of being negatively evaluated by others or of being publicly embarrassed because of impulsive acts. Almost everyone experiences "stage fright" when speaking or performing in front of a group. Since occasionally there are artists or performers with social anxiety disorder who are able to perform publicly without significant anxiety, their love of performing and practicing their art may be diminishing their anxiety. Although some high-functioning phobics such as Glenn Gould are able to perform despite anxiety, most people with social phobias become so anxious that performance is out of the question. In fact, their fear of public scrutiny and potential humiliation becomes so pervasive that normal life can become impossible (den Boer 2000; Margolis & Swartz, 2001). Another social phobia is fear of intimacy, or "love-shyness", which most adversely affects certain men. Those afflicted find themselves unable to initiate intimate adult relationships (Gilmartin 1987).

Memory management

Among other things, a multiprogramming operating system kernel must be responsible for managing all system memory which is currently in use by programs. This ensures that a program does not interfere with memory already used by another program. Since programs time share, each program must have independent access to memory.

Cooperative memory management, used by many early operating systems assumes that all programs make voluntary use of the kernel's memory manager, and do not exceed their allocated memory. This system of memory management is almost never seen anymore, since programs often contain bugs which can cause them to exceed their allocated memory. If a program fails it may cause memory used by one or more other programs to be affected or overwritten. Malicious programs, or viruses may purposefully alter another program's memory or may affect the operation of the operating system itself. With cooperative memory management it takes only one misbehaved program to crash the system.

Memory protection enables the kernel to limit a process' access to the computer's memory. Various methods of memory protection exist, including memory segmentation and paging. All methods require some level of hardware support (such as the 80286 MMU) which doesn't exist in all computers.

In both segmentation and paging, certain protected mode registers specify to the CPU what memory address it should allow a running program to access. Attempts to access other addresses will trigger an interrupt which will cause the CPU to re-enter supervisor mode, placing the kernel in charge. This is called a segmentation violation or Seg-V for short, and since it is usually a sign of a misbehaving program, the kernel will generally kill the offending program, and report the error.

Windows 3.1-Me had some level of memory protection, but programs could easily circumvent the need to use it. Under Windows 9x all MS-DOS applications ran in supervisor mode, giving them almost unlimited control over the computer. A general protection fault would be produced indicating a segmentation violation had occurred, however the system would often crash anyway.

Population Ecology

Population ecology Population ecology is a major sub-field of ecology that deals with the dynamics of species populations and how these populations interact with the environment.

The older term, autecology refers to the roughly same field of study, coming from the division of ecology into autecology—the study of individual species in relation to the environment—and synecology—the study of groups of organisms in relation to the environment—or community ecology. Odum (1959, p. 8) considered that synecology should be divided into population ecology, community ecology, and ecosystem ecology, defining autecology as essentially "species ecology." However, biologists have for some time recognized that the more significant level of organization of a species is a population, because at this level the species gene pool is most coherent. In fact, Odum regarded "autecology" as no longer a "present tendency" in ecology (i.e., an archaic term), although included "species ecology"—studies emphasizing life history and behavior as adaptations to the environment of individual organisms or species—as one of four sub-divisions of ecology.

The development of the field of population ecology owes much to the science of demography and the use of actuarial life tables. Population ecology has also played an important role in the development of the field of conservation biology especially in the development of population viability analysis (PVA) which makes it possible to predict the long-term probability of a species persisting in a given habitat patch .

PCX

PCX is an image file format developed by the ZSoft Corporation of Marietta, Georgia, USA. It was the native file format for PC Paintbrush (PCX = "PC Paintbrush Exchange") and became one of the first widely accepted DOS imaging standards, although its use has since been succeeded by more sophisticated image formats such as GIF, JPEG, and PNG.

The PCX is a device-independent raster image format; the file header stores information about the display hardware (screen resolution, color depth and palette information, bit planes and so on) separately from the actual image information, allowing the image to be properly transferred and displayed on computer systems with different hardware. PCX files commonly store palette-indexed images ranging from 2 or 4 colors to 16 and 256 colors, although the format has been extended to record true-color (24-bit) images as well.

A PCX file has three main sections. A 128 byte header which is followed by image data and an optional 256 color palette. PCX files were designed for use on PC and so always use little endian byte ordering.

Mitosis

Mitosis is the process by which a cell separates the chromosomes in its cell nucleus, into two identical sets in two daughter nuclei. It is generally followed immediately by cytokinesis, which divides the nuclei, cytoplasm, organelles and cell membrane into two daughter cells containing roughly equal shares of these cellular components. Mitosis and cytokinesis together define the mitotic (M) phase of the cell cycle - the division of the mother cell into two daughter cells, genetically identical to each other and to their parent cell.

Mitosis occurs exclusively in eukaryotic cells, but occurs in different ways in different species. For example, animals undergo an "open" mitosis, where the nuclear envelope breaks down before the chromosomes separate, while fungi such as Aspergillus nidulans and Saccharomyces cerevisiae (yeast) undergo a "closed" mitosis, where chromosomes divide within an intact cell nucleus. Prokaryotic cells, which lack a nucleus, divide by a process called binary fission.

The process of mitosis is complex and highly regulated. The sequence of events is divided into phases, corresponding to the completion of one set of activities and the start of the next. These stages are prophase, prometaphase, metaphase, anaphase and telophase. During the process of mitosis the pairs of chromosomes condense and attach to fibers that pull the sister chromatids to opposite sides of the cell. The cell then divides in cytokinesis, to produce two identical daughter cells.

Because cytokinesis usually occurs in conjunction with mitosis, "mitosis" is often used interchangeably with "mitotic phase". However, there are many cells where mitosis and cytokinesis occur separately, forming single cells with multiple nuclei. This occurs most notably among the fungi and slime moulds, but is found in various different groups. Even in animals, cytokinesis and mitosis may occur independently, for instance during certain stages of fruit fly embryonic development. Errors in mitosis can either kill a cell through apoptosis or cause mutations that may lead to cancer.

Sociocultural evolution

Sociocultural evolution(ism) is an umbrella term for theories of cultural evolution and social evolution, describing how cultures and societies have developed over time. Although such theories typically provide models for understanding the relationship between technologies, social structure, the values of a society, and how and why they change with time, they vary as to the extent to which they describe specific mechanisms of variation and social change.

Most 19th century and some 20th century approaches aimed to provide models for the evolution of humankind as a whole, arguing that different societies are at different stages of social development. At present this thread is continued to some extent within the World System approach. Many of the more recent 20th-century approaches focus on changes specific to individual societies and reject the idea of directional change, or social progress. Most archaeologists and cultural anthropologists work within the framework of modern theories of sociocultural evolution. Modern approaches to sociocultural evolution include neoevolutionism, sociobiology, theory of modernization and theory of postindustrial society.

Featural scripts

A featural script notates the building blocks of the phonemes that make up a language. For instance, all sounds pronounced with the lips ("labial" sounds) may have some element in common. In the Latin alphabet, this is accidentally the case with the letters "b" and "p"; however, labial "m" is completely dissimilar, and the similar-looking "q" is not labial. In Korean hangul, however, all four labial consonants are based on the same basic element. However, in practice, Korean is learned by children as an ordinary alphabet, and the featural elements tend to pass unnoticed.

Another featural script is SignWriting, the most popular writing system for many sign languages, where the shapes and movements of the hands and face are represented iconically. Featural scripts are also common in fictional or invented systems, such as Tolkien's Tengwar.

Purebred breeding

Mating animals of the same breed for maintaining such breed is referred to as purebred breeding. Opposite to the practice of mating animals of different breeds, purebred breeding aims to establish and maintain stable traits, that animals will pass to the next generation. By "breeding the best to the best," employing a certain degree of inbreeding, considerable culling, and selection for "superior" qualities, one could develop a bloodline or "breed" superior in certain respects to the original base stock.

Such animals can be recorded with a breed registry, the organisation that maintains pedigrees and/or stud books.

The observable phenomenon of hybrid vigor stands in contrast to the notion of breed purity. However, on the other hand, indiscriminate breeding of crossbred or hybrid animals may also result in degradation of quality.

Buckler

A buckler (French bouclier 'shield', from old French bocle, boucle 'boss') is a small shield gripped in the fist -- it was generally used as a companion weapon in hand-to-hand combat during the Middle Ages, as its size made it poor protection against missile weapons (e.g., arrows) but useful in deflecting the blow of an opponent's sword or mace. There are two major forms of medievally documented bucklers. The first is a simple round shield with the fist positioned directly behind the boss with a variety of shapes of face and depths of rim. These could also have projections from the top and bottom as in Hans Talhoffer's Fechtbücher or serrated rings around the boss as in one example in the Wallace Collection. The second major form is a corrugated rectangle as suggested by Achille Marozzo in his Opera Nova.

Molecular basis

Several types of molecules are particularly important during morphogenesis. Morphogens are soluble molecules that can diffuse and carry signals that control cell differentiation decisions in a concentration-dependent fashion. Morphogens typically act through binding to specific protein receptors. An important class of molecules involved in morphogenesis are transcription factor proteins that determine the fate of cells by interacting with DNA. These can be coded for by master regulatory genes and either activate or deactivate the transcription of other genes; in turn, these secondary gene products can regulate the expression of still other genes in a regulatory cascade. Another class of molecules involved in morphogenesis are molecules that control cell adhesion. For example, during gastrulation, clumps of stem cells switch off their cell-to-cell adhesion, become migratory, and take up new positions within an embryo where they again activate specific cell adhesion proteins and form new tissues and organs. Several examples that illustrate the roles of morphogens, transcription factors and cell adhesion molecules in morphogenesis are discussed below.

Cytokinesis

Cytokinesis is the process whereby the cytoplasm of a single cell is divided to spawn two daughter cells. It usually initiates during the late stages of mitosis, and sometimes meiosis, splitting a binucleate cell in two, to ensure that chromosome number is maintained from one generation to the next. In animal cells, one notable exception to the normal process of cytokinesis is oogenesis (the creation of an ovum in the ovarian follicle of the ovary), where the ovum takes almost all the cytoplasm and organelles, leaving very little for the resulting polar bodies, which then die. In plant cells, a dividing structure known as the cell plate forms across the centre of the cytoplasm and a new cell wall forms between the two daughter cells.

During normal proliferative divisions, animal cell cytokinesis begins shortly after the onset of sister chromatid separation in the anaphase of mitosis. A contractile ring, made of non-muscle myosin II and actin filaments, assembles equatorially (in the middle of the cell) at the cell cortex (adjacent to the cell membrane). Myosin II uses the free energy released when ATP is hydrolysed to move along these actin filaments, constricting the cell membrane to form a cleavage furrow. Continued hydrolysis causes this cleavage furrow to ingress (move inwards), a striking process that is clearly visible down a light microscope. Ingression continues until a so-called midbody structure (composed of electron-dense, proteinaceous material) is formed and the process of abscission then physically cleaves this midbody into two. Abscission depends on septin filaments beneath the cleavage furrow, which provide a structural basis to ensure completion of cytokinesis. After cytokinesis, non-kinetochore microtubules reorganize and disappear into a new cytoskeleton as the cell cycle returns to interphase (see also cell cycle).

VLSI

The final step in the development process, starting in the 1980s and continuing through the present, was "Very Large-Scale Integration" (VLSI). This could be said to start with hundreds of thousands of transistors in the early 1980s, and continues beyond several billion transistors as of 2007.

There was no single breakthrough that allowed this increase in complexity, though many factors helped. Manufacturing moved to smaller rules and cleaner fabs, allowing them to produce chips with more transistors with adequate yield, as summarized by the International Technology Roadmap for Semiconductors (ITRS). Design tools improved enough to make it practical to finish these designs in a reasonable time. The more energy efficient CMOS replaced NMOS and PMOS, avoiding a prohibitive increase in power consumption. Better texts such as the landmark textbook by Mead and Conway helped schools educate more designers...

In 1986 the first one megabit RAM chips were introduced, which contained more than one million transistors. Microprocessor chips passed the million transistor mark in 1989 and the billion transistor mark in 2005. The trend continues largely unabated, with chips introduced in 2007 containing tens of billions of memory transistors .

Popular trance

By the mid-1990s trance, specifically progressive trance, which emerged from acid trance much as Progressive house had emerged from Acid house, had emerged commercially as one of the dominant genres of dance music. Progressive trance has set in stone the basic formula of modern trance by becoming even more focused on the anthemic basslines and lead melodies, moving away from hypnotic, repetitive, arpeggiated analog synth patterns and spacey pads. Popular elements and anthemic pads became more widespread. Compositions continued to contain incremental changes (aka progressive structures), sometimes composed in thirds (as BT frequently does). Meanwhile, a different type of trance, generally called uplifting trance was becoming popular. Uplifting trance had buildups and breakdowns that were longer and more exaggerated, being more direct and less subtle than progressive, with more easily identifiable tunes and anthems. Many such trance tracks follow a set form, featuring an introduction, steady build, a breakdown, and then an anthem, a form aptly called the "build-breakdown-anthem" form. Uplifting vocals, usually female, were also becoming more and more prevalent, adding to trance's popular appeal.

Immensely popular, trance found itself filling a niche that was 'edgier' than house, more soothing than drum and bass, and more melodic than techno, which made it accessible to a wide audience. Artists like Tiësto, Armin van Buuren, Paul van Dyk, Robert Miles, Above & Beyond, Darren Tate, Ferry Corsten, Johan Gielen, ATB and Paul Oakenfold came to the forefront as premier producers and remixers, bringing with them the emotional, "epic" feel of the style. Many of these producers also DJ'd in clubs playing their own productions as well as those by other trance DJs. By the end of the 1990s, trance remained commercially huge, but had fractured into an extremely diverse genre. Some of the artists that had helped create the trance sound in the early and mid-1990s had, by the end of the decade, abandoned trance completely in favor of more underground sounds - artists of particular note here include Pascal F.E.O.S. and Oliver Lieb.

As trance entered the mainstream it alienated many of its original fans. As the industry became bigger, record labels, Ibiza based producers, clubs (most notably Ministry of Sound) and DJs continued to alter their sound to more of a pop based one, so as to make the sound more accessible to an even wider and younger audience.

Mushroom

A mushroom is the fleshy, spore-bearing fruiting body of a fungus, typically produced above ground on soil or on its food source. The standard for the name "mushroom" is the cultivated white button mushroom, Agaricus bisporus, hence the word mushroom is most often applied to fungi (Basidiomycota, Agaricomycetes) that have a stem (stipe), a cap (pileus), and gills (lamellae, sing. lamella) on the underside of the cap just as do store-bought white mushrooms. However, "mushroom" can also refer to a wide variety of gilled fungi, with or without stems, and the term is used even more generally to describe both the fleshy fruiting bodies of some Ascomycota and the woody or leathery fruiting bodies of some Basidiomycota, depending upon the context of the word. Forms deviating from the standard form usually have more specific names, such as "puffball", "stinkhorn", and "morel", and gilled mushrooms themselves are often called "agarics" in reference to their similarity to Agaricus or their placement in the order Agaricales. By extension, "mushroom" can also designate the entire fungus when in culture or the thallus (called a mycelium) of species forming the fruiting bodies called mushrooms.

Understanding the Context

Many different methods of communication are possible on the Internet; some use specific software and all involve text and/or graphics.

* Some activities take place in real-time while others allow for a delayed reply.

* Discussion areas may be public or exist for a particular group of people.

* Information can either be broadcast or targeted at a particular user.

As the technology develops, and users and providers become more proficient, the boundaries between the different Internet services are blurred. For example, email is used in chat rooms, web pages include discussion areas and newsgroups can have files attached.

Each Internet service has its own educational value, risks, and recommended ways of dealing with problems, and these are detailed in the following pages. They are not exhaustive and many apply across Internet services. Schools should consider the sum of the advice in these guidelines across all areas.

Overview of the Click Thinking Pack

Schools and government initiatives are encouraging the educational use of the Internet right across the curriculum and young people are taking readily to this way of learning and communicating.

At the same time, the media tends to focus on the rare occasions when use of the Internet causes distress. The Scottish Executive believes that young people need to be protected and informed; and that those responsible for them, whether teachers, parents or other careers, should be aware of the issues involved.

Previous Scottish Executive Education Department (SEED) publications in this area have dealt with the need to protect pupils from misuse of computers (Information Ethics) and to understand copyright implications (Copyright and Ethics in a Digital Age).

This booklet focuses on personal safety and wellbeing. It attempts to clarify potential risks and to empower Internet users in schools so that they can keep themselves safe. Those who manage Scottish schools, and all teachers, whether responsible for a primary class or for teaching a subject, will find policy guidelines and background information which will prepare our pupils to take their safe and well-earned place in the Digital Age.

Much of the advice in these guidelines will be relevant to other Local Authority staff responsible for overseeing young people's use of the Internet (e.g. managers and staff in community education centers, residential homes for young people, libraries and other settings). These groups should take account of the messages about personal safety, and put into place the recommendations suitable for their setting.

BACK TO SCHOOL SAFETY ALERT:

CPSC Urges Bicyclists to Wear Helmets

CPSC Document #5002

Each year about 800 bicyclists are killed and more than half a million are treated in hospital emergency rooms. In recent years, almost two-thirds of the deaths and one-third of the injuries involved head and face injury. About one-half the injuries to children under the age of 10 involved the head or face. Helmets may reduce the risk of head injury to bicyclists by as much as 85 percent. Yet, only about 50 percent of bicyclists wear helmets.

The purpose of a helmet is to absorb the energy of an impact to minimize or prevent a head injury. Crushable, expanded polystyrene foam generally is used for this purpose.

A bicycle helmet should have a snug but comfortable fit on the rider's head. Some helmets are available with several different thicknesses of internal padding to custom fit the helmet to the user. If a parent is buying a helmet for a child, the CPSC recommends that the child accompany the parent so that the helmet can be tested for a good fit.

For a helmet to provide protection during impact, it must have a chin strap and buckle that will stay securely fastened. No combination of twisting or pulling should remove the helmet from the head or loosen the buckle on the strap. Children should be instructed to always wear the helmet level on the forehead, not tilted back. The chin strap should be adjusted correctly and firmly buckled.

Helmets manufactured after March 1999, are required by federal law to meet the CPSC standard. When purchasing a helmet, consumers are urged to examine the helmet and accompanying instructions and safety literature carefully. Consumers should also look for a label stating conformance with the CPSC standard.

Bicyclists should avoid riding at night. If you must ride at night, install and use front and rear lights on the bicycle and wear clothing with reflective tape or markings. These precautions are in addition to the reflectors that the CPSC requires to be on the front, rear, pedals, and wheels of bicycles.

Many bicycle-car crashes can be avoided by applying the rules of the road and by increasing attentiveness of cyclists and motorists. Bicyclists have a legal right to share the road, but they are often not noticed in traffic. Drivers should always keep an eye out for bicyclists, especially when turning, merging, changing lanes, or entering intersections.

All-Terrain Vehicle Safety

Too many ATV riders -- young and old -- are dying or experiencing life altering injuries from incidents involving ATVs. The U.S. Consumer Product Safety Commission (CPSC) recommends that all ATV riders follow the seven safety tips below every time they ride.

An estimated 740 people died in 2003* in incidents associated with ATVs. In addition, in 2004* there were an estimated 136,100 emergency room treated injuries associated with ATVs. About a third of all deaths and injuries involved victims under 16 years old. CPSC also reported that ridership has continued to grow, with 6.2 million 4-wheeled ATVs in use in 2003*.

The major ATV manufacturers agreed in Consent Decrees in 1988 and in subsequent voluntary action plans that they would not manufacture three-wheel ATVs; they would place engine size restrictions on ATVs sold for use by children under 16; and they would offer driver-training programs.

Children and young people under the age of 16 should not ride adult ATVs.

All ATV users should take a hands-on safety training course.

Always wear a helmet and safety gear such as boots and gloves while on an ATV.

Never drive an ATV on paved roads.

Never drive while under the influence of drugs or alcohol.

Never drive a youth or single-rider adult ATV with a passenger, and never ride these vehicles as a passenger.

There are some ATVs that are designed for two riders. Passengers on tandem ATVs should be at least 12 years old.

J-Hook Shaped Stake style (Anchor Types)

This style is used when holes are not pre-drilled into the ground shoes (bars) or rear ground shoe (bar) of the goal. Similar to the peg or stake style, this anchor is hammered, at an angle if possible, directly into the earth. The curved (top) portion of this anchor fits over the goal member to secure it to the ground (Figure 3.4). Typically, two to four stakes of this type are recommended (per goal), depending on stake structure, manufacturers specifications, weight of goal, and soil conditions. Stakes with larger diameters or textured surfaces have greater holding capacity.

J-Hook Shaped Stake style (Anchor Types)

This style is used when holes are not pre-drilled into the ground shoes (bars) or rear ground shoe (bar) of the goal. Similar to the peg or stake style, this anchor is hammered, at an angle if possible, directly into the earth. The curved (top) portion of this anchor fits over the goal member to secure it to the ground (Figure 3.4). Typically, two to four stakes of this type are recommended (per goal), depending on stake structure, manufacturers specifications, weight of goal, and soil conditions. Stakes with larger diameters or textured surfaces have greater holding capacity.

Anchoring/Securing/Counterweighing Guidelines

A properly anchored/counterweighted movable soccer goal is much less likely to tip over. Remember to secure the goal to the ground (preferably at the rear of the goal), making sure the anchors are flush with the ground and clearly visible. It is IMPERATIVE that ALL movable soccer goals are always anchored properly (see Figure 2). There are several different ways to secure your soccer goal. The number and type of anchors to be used will depend on a number of factors, such as soil type, soil moisture content, and total goal weight.

Soccer Goal Injuries and Deaths

According to the 1994 National Soccer Participation Survey (Soccer Industry Council of America), over 16 million persons in the United States play soccer at least once a year. Seventy-four percent (over 12 million) of these persons are under the age of 18. Soccer ranks fourth in participation for those under 18, following basketball, volleyball, and softball and well ahead of baseball, which has an annual participation of 9.7 million.
There are approximately 225,000 to 500,000 soccer goals in the United States. Many of these soccer goals are unsafe because they are unstable and are either unanchored or not properly anchored or counter-balanced. These movable soccer goals pose an unnecessary risk of tip over to children who climb on goals (or nets) or hang from the crossbar.
The CPSC knows of four deaths in 1990 alone and at least 21 deaths during the past 16 years (1979-1994) associated with movable soccer goals. In addition, an estimated 120 injuries involving falling goals were treated each year in U.S. hospital emergency rooms during the period 1989 through 1993. Many of the serious incidents occurred when the soccer goals tipped over onto the victim. Almost all of the goals involved in these tip over appeared to be home-made by high school shop classes, custodial members, or local welders, not professionally manufactured. These home-made goals are often very heavy and unstable.
The majority of movable soccer goals are constructed of metal, typically weighing 150-500 pounds. The serious injuries and deaths are a result of blunt force trauma to the head, neck, chest, and limbs of the victims. In most cases this occurred when the goal tipped or was accidentally tipped onto the victim. In one case an 8-year-old child was fatally injured when the movable soccer goal he was climbing tipped over and struck him on the head. In another case, a 20-year-old male died from a massive head trauma when he pulled a goal down on himself while attempting to do chin-ups. In a third case, while attempting to tighten a net to its goal post, the victim’s father lifted the back base of the goal causing it to tip over striking his 3-year-old child on the head, causing a fatal injury.
High winds can also cause movable soccer goals to fall over. For example, a 9-year-old was fatally injured when a goal was tipped over by a gust of wind. In another incident, a 19-year-old goalie suffered stress fractures to both legs when the soccer goal was blown on top of her.

B.C.-Canada Place officially closes doors

Monday, March 20, 2006 marks the official close of British Columbia-Canada Place, one of the most successful attractions of the 2006 Torino Olympic and Paralympic Winter Games.

Over the course of the 2006 Olympic and Paralympic Winter Games, British Columbia-Canada Place drew more than 100,000 visitors and journalists. These visitors were able to experience first hand the province’s culture, heritage, natural beauty and bustling cities. Also, more than 80 British Columbia businesses were able to connect with an international audience and showcase some of B.C.’s best products and services.

B.C.-Canada Place will be a legacy to the people of Torino. The official transfer took place in a ceremony yesterday, with Torino Mayor Sergio Chiamparino accepting a ceremonial key to the building.

“This generous gift from British Columbia will be a constant reminder of our friends in Canada and the celebrations that took place in our city during the 2006 Winter Games,” says Mayor Chiamparino. “We are honored to have this permanent B.C. presence in our city.”

Kent Kickin' Mini-Scooters

Kent is recalling about 90,000 scooters. The scooter handles can unexpectedly come out of the steering column if the clamp holding them in is not tight, causing the rider to lose control, fall and possibly suffer injuries.
Kent has received four reports of the handles coming out, resulting in four children suffering injuries, including broken arms, a broken wrist, bruises, abrasions and a cracked tooth.
These are Kickin' Mini-Scooters made of chrome-plated steel. A vertical decal on the steering column reads "KICKIN' MINI SCOOTER." The scooter's black plastic platform measures about 15 inches long, and it has 4-inch translucent in-line style wheels. "KENT" and "MADE IN CHINA" are written on the lower part of the steering column. The scooters were sold with black backpacks embroidered in white with the word "Kickin."
Toys R us stores nationwide sold the Kent scooters from May 2000 through September 2000 for about $60.
Consumers should stop riding these Kent scooters immediately, and call Kent International to receive a free replacement handlebar with pins to secure the handlebars. For more information, call Kent International at (800) 451-KENT (5368) between 8 a.m. and 5 p.m. ET Monday through Friday.
Kent has sold other models to Toys R Us such as the Street Craze, the Street Racer and Scoot that are NOT part of this recall. Scooters that Kent sold to Wal Mart, Meijer's, Target and AAFES are also NOT part of this recall.

Trampoline Safety Alert

The U. S. Consumer Product Safety Commission (CPSC) wants you and your family to be safe when using trampolines. The CPSC estimates that in 2001 there were 91,870 hospital emergency room-treated injuries associated with trampolines. About 93 percent of the victims were under 15 years of age, and 11 percent were under 5 years of age. Since 1990, CPSC has received reports of 6 deaths of children under age 15 involving trampolines. Injuries and deaths were caused by:

* Colliding with another person on the trampoline.
* Landing improperly while jumping or doing stunts on the trampoline.
* Falling or jumping off the trampoline.
* Falling on the trampoline springs or frame.
Most of the trampolines associated with injuries were at private homes.
Here are the steps you can take to help prevent serious trampoline injuries, especially paralysis, fractures, sprains, and bruises:

* Allow only one person on the trampoline at a time.
* Do not attempt or allow somersaults because landing on the head or neck can cause paralysis.
* Do not use the trampoline without shock-absorbing pads that completely cover its springs, hooks, and frame.
* Place the trampoline away from structures, trees, and other play areas.
* No child under 6 years of age should use a full-size trampoline. Do not use a ladder with the trampoline because it provides unsupervised access by small children.
* Always supervise children who use a trampoline.
* Trampoline enclosures can help prevent injuries from falls off trampolines.

Accumulator

In a computer CPU, an accumulator is a register in which intermediary arithmetic and logic results are stored. Without a register like an accumulator, it would be necessary to write the result of each calculation (addition, multiplication, shift, etc.) to main memory, possibly only to be read right back again for use in the next operation. Access to main memory is slower than access to a register like the accumulator because the technology used for the huge main memory is slower (but cheaper) than that used for a register.

The canonical example for accumulator use is adding a list of numbers. The accumulator is initially set to zero, then each number in spin is added to the value in the accumulator. Only when all numbers have been added is the result seized in the accumulator written to main memory or to another, non-accumulator, CPU register.

Obsolete And Special-Purpose Printing Technologies
The following technology are either out of date, or limited to particular applications though most were, at one time, in widespread use.

Thermal printers work by selectively heating regions of exacting heat-sensitive paper. These printers are limited to special-purpose applications such as money registers and the printers in ATMs and gasoline dispensers. They are also used in some older reasonably priced fax machines.

Impact printers rely on a forcible impact to transfer ink to the media, like to the action of a typewriter. All but the dot matrix printer rely on the use of shaped characters, letterforms that represent each of the characters that the printer was capable of printing. In addition, most of these printers were confidential to monochrome printing in a single typeface at one time, although bolding and underlining of text could be done by overstriking, that is, printing two or more impressions in the same character position. Impact printers variety contain, Typewriter-derived printers, Teletypewriter-derived printers, Daisy wheel printers, Dot matrix printers and Line printers. Dot matrix printers remain in general use in businesses where multi-part forms are printed, such as car rental service counters.

British coin Triple Unite

The Triple Unite, valued at sixty shillings, 60/- or three pounds, was the peak British denomination to be shaped in the era of the hammered money. It was only shaped during the Civil War, at King Charles I's mints at Oxford and, on the odd occasion, at Shrewsbury in 1642. It weighed 421 grains, or right away over seven-eighths of a troy ounce.
The gold coins are without a doubt magnificent pieces of work, and they show the king holding a sword and an olive branch on the obverse, suggestive of his wish for peace rather than war.
The extremely rare Shrewsbury-produced coin shows, on the obverse, a plume behind the kings' head bounded by the legend CAROLUS DG MAG BRIT FRAN ET HIBER REX -- Charles by the grace of God King of Great Britain France and Ireland.
The overturn shows the legend RELIG PROT LEG ANG LIBER PAR in two lines -- The religious confidence of the Protestants, the laws of England and the liberty of Parliament, with three plumes and the value numeral III above the announcement and the year 1642 below it, the whole being surrounded by the legend EXURGAT DEUS DISSIPENTUR INIMICI - Let God arise and His enemies be scattered.
The Oxford issues are extremely similar to the Shrewsbury one, except that the legend on the reverse appears in three lines rather than two, and the face legend appears as CAROLUS DG MAG BRIT FR ET HIB REX. Oxford coins come into view with slight design differences in each year of 1642, 1643, and 1644

Sustainable Transportation

Sustainable transportation concerns systems, policies, and technologies. It aims for the efficient transit of goods and serivces, and sustainable freight and delivery systems. The design of vehicle-free city planning, along with pedestrian and bicycle frendly design of neighbourhoods is a critical aspect for grassroots activities, as are telework and teleconferencing.

Ozone Layer

"The ozone layer" refers to the ozone within stratosphere, where over 90% of the earth's ozone resides. Ozone is an irritating, corrosive, colorless gas with a smell something like burning electrical wiring. In fact, ozone is easily produced by any high-voltage electrical arc (spark plugs, Van de Graaff generators, Tesla coils, arc welders). Each molecule of ozone has three oxygen atoms and is produced when oxygen molecules (O2) are broken up by energetic electrons or high energy radiation.

Christmas Day


Christmas is a enjoyable religious holiday when Christians rejoice the birth of Jesus Christ. The Christmas chronicle comes from the Bible. An angel appeared to shepherd and told them that a Savior had been born to Mary and Joseph in a stable in Bethlehem. Three Judicious Men from the East (the Magi) followed a amazing star which led them to the baby Jesus to whom they paid homage and presented gifts of gold, frankincense and myrrh.
To people all over the earth, Christmas is a flavor of giving and receiving presents. In some European countries, priest Christmas, or Saint Nicholas, comes into houses in the night and leaves gifts for the children. Saint Nicholas is represented as a kindheartedly man with a red cloak and long white beard. Another nature, the Norse God Odin, ride on a mysterious flying horse across the sky in the winter to prize people with gifts. These different myths passed across the ages to make the present day Santa Claus.
On December 24, Christmas Eve, Santa hitches his eight reindeer to a toboggan and loads it with presents. The reindeer drag him and his sleigh through the sky to deliver presents to children all around the earth, that is, if they had been good all year. Several American towns maintain the strength of Santa Claus.
Santa Claus exists only in our imagination. But he, Saint Nicholas, and father Christmas are feelings of giving. Christmas has been associated with gift giving since the Wise Men brought gifts to welcome the newborn Jesus Christ.In eagerness of Santa's visit, American children pay attention to their parents read "The Night previous to Christmas" before they go to bed on Christmas Eve

Uses of Ginger

There are array of uses suggested for ginger. A tea brewed from the is a folk medicine for colds. Ginger ale and ginger beer have been suggested as "stomach settlers" for generation in countries where the beverages are made and ginger water was commonly used to avoid heat cramps in the US. Ginger has also been historically used to take care of inflammation which some scientific studies support, though one arthritis trial showed ginger to be no better than a placebo or ibuprofen. Research on rats suggests that ginger may be valuable for treating diabetes.

The Banyan Tree

In India the Banyan Tree is consider as National tree. This huge tree overlooks over its neighbors and has the widest reaching roots of all known trees, easily covering several acres. It sends off new shoots from its roots, so that one tree is really a interweave of branches, roots, and trunks. The banyan tree restart and lives for an incredible length of time--thus it is thought of as the everlasting tree.

Its size and leafy shelter are valued in India as a place of relax and mirror image, not to mention defense from the hot sun! It is still the focus and gathering place for local councils and meetings. India has a long history of worship this tree; it figures importantly in many of the oldest stories of the nation.

Adam Smith

He was born in 1723 in Kirkcaldy, Fife, Scotland, fatherless. The accurate date of his birth is unidentified. He was baptized June 5, 1723. At the age of fifteen, he begins his school at Glasgow and Oxford. In 1751, after he finished school, he was obtained a job at Glasgow University where he became the new Professor of judgment. There he lectured on beliefs, expression, jurisprudence and the political economy.

Just eight years after his training career began; he published his work. The Theory of ethical Sentiments. This show that he could write and he recognized himself in the world. In 1776, a query into the Nature and Causes of the Wealth of Nations was published. Immediately the book was a success. It had a remarkable effect on how people attention. Although it took him ten years to write, he became a very rich man from it.

Abraham Lincoln

The brave man of the familiar People. It had been an extended time coming. Terribly separated by the issue of slavery, thirty-one million American citizens were in 1860
Called upon to vote for 16th President of the United States. The Democratic Party meets at its National Party Convention in Charleston, South Carolina, in order to choose their candidate in favor of the presidency. Split over slavery, each section, Northern Democrats on the one hand and Southern Democrats on the other, presented its own conflicting proposal for the party platform.
In February 1860, Senator Jefferson Davis of Mississippi claimed that neither the Congress of the United States nor the territorial parliaments had the control to handle slavery.

A Team Player

The superiority of being a team player is one that everyone should enjoy. A team player is someone with good qualities who makes contributions and has the force to motivate each one around him or her. This individuality can be used in many areas such as games, family life, and in the company. You are more expected to be hired in the production if you have and demonstrate the qualities of a team player. As the business climate gets tougher before it gets improved, it is time to hike the talk if you want to develop.

Managers will require all the cooperation they can get. To land a high paying job with a major business you need to be a team player. Having good qualities is one of the most significant characters you can have. Being a team performer thinks of the team as a whole and is not selfish in their views and decisions.

A Snapshot of Macro-Economics

Economics is the learning of making choices. High school and college students all over required to take economic courses in order to achieve a diploma. Why is economics so important because it provides a guide for students for real-world situations Economics is divided into two types microeconomics and macroeconomics. Microeconomics is the study of economics at a slim level. For example absorbed on how a detailed business functions is microeconomics.
Studying the world economy is classified as Macroeconomics; its center on a much broader level. All students must understand the concept of insufficiency. Scarcity is a condition that occurs because society has unlimited wants and needs however the amount of property is limited. Unlimited wants and needs are what encourage us to create goods and services. We are never satisfied therefore we always have a want or need. On the other hand our income is limited.

A Civil Role Model
The word civil carries a lot of power. The usage needs to be carefully considered when it's entered into a sentence or an expression. Civil means a wide difference of things. It can be defined as a way to be attentive of the forms required for good reproduction. It can also be a means to the needs and affairs of the common public. However, the latter of the two definitions can also be extended to include a definition of the private rights and the remedy sought by action or costume. The point is that the word civil has a greater significance that has been embraced by our American legal traditions. It is the premise that law is there to provide the people and the lawyers are nothing more than mere guardians of law.
These are thoughts that were measured during the class viewing of A Civil Action. In the events of the case, there were many concerns that were brought up about our permissible culture.

A cold winter morning

I am lying on a white, sandy beach with the glowing sun beating down directly on my tanned summer body. I notice the beautiful, Puerto Rican Cabana boy heading over to replenish my newly empty Margarita glass. I look around my private beach and at the crystal clear, sparkling ocean water tempting me warmly in to its open arms. I get up from my bed on the sand, walking gradually to the water. The sand is flaming my bare feet with such passion that I speed my walk up almost into a jog. As I reach the waterfront I stop, as a falling wave is heading toward my glazing body; I step closer to be in its direct path. I move smoothly in with such grace; I prepare myself for the cool, refreshing bath. I hear an alarm bell screaming, I look around in a panic as it is hurting my ears and giving me a powerful headache. My beach is wandering away, and then it is gone. The ‘warmness my body feels is gone.
I open my eyes; I am gloomy, lifeless room. My alarm clock is going off and the sound can only be compared with exhausted your fingernails across a chalkboard.

A Business Plan

The following production plan has been formulated to obtain $200,000 in capital to launch a coffeehouse on the college grounds of Doane College named The Orange Cup. This arrangement will also serve as a formal sketch for the first five year's of operation. The financial forecasts show that this asset has significant pledge for the future.
The Orange Cup will provide for the Doane College Community a comfortable atmosphere while serve quality coffee at a reasonably priced with extraordinary service. An ample variety of coffee products including, gourmet coffees, latte, cappuccino, espresso, and iced coffee, will be offered at The Orange Cup. In addition, The Orange Cup will recommend juice, pop, and bottled water, hot cocoa, hot cider, and tea.

The marking plan for The Orange Cup is to attract students and staff to the coffeehouse to continue in a relaxed atmosphere, or for those customers with excited schedules, the expediency of our products.

A simple Girl
Around and around it soared in brutal circles, tearing from side to side her animated temples. At a standstill, they did not do anything. Still, they simply laid there with faces of chalk, invalid of all human emotions. She could not look at them in hopes of relieve, for long. The cherry rivers that flowed across her eyes, streamed down her steaming cheeks, made vision impossible.
Life was simply the stack of decayed flesh that enclosed her. From his immortal lips hung the bodies of all those who died struggle for him and all those who had tampered with self luxury. For that, she dammed him for all eternity; in every form he understood she dammed him. He had been her guiding angle and now it became evident to her. No prayer would pass her conditions lips, for this had been his movement she had fought and they had lost other than just a clash.

Java Coffee

Java coffee is a coffee bent on the island of Java. In the USA, the term "Java" independently is slang for coffee generally. The Indonesian phrase Kopi Jawa refers not only to the origin of the coffee, but is used to distinguish the black, very sweet coffee, strong with powdered grains in the drink, from other forms of the drink.The Dutch began farming of coffee trees on Java (part of the Dutch East Indies) in the 17th century and it has been export internationally since. The coffee farming systems found on Java have changed significantly over time.

A rust disease in the late 1880s killed off much of the plantation stocks in Sukabumi, before distribution to Central Java and parts of East Java. The Dutch respond by replacing the Arabica firstly with Liberica (a tough, but somewhat unpleasant coffee) and later with Robusta. Today Java's old royally era plantations provide just a portion of the coffee grown on the island. Logo of Java programming language is a coffee cup.

Cucumber

Cucumbers are usually harvested while still green. They can be eaten unrefined or cooked, or pickled. Although a smaller amount nutritious than most fruit, the fresh cucumber seeds are still a source of vitamin K, vitamin C, and potassium, also providing nutritional fiber, vitamin A, vitamin B6, pantothenic acid, magnesium, phosphorus, copper, thiamin, folate, and manganese. Cucumbers are used in the attractive food art, graded manger.

Cucumbers can be pickled for taste and longer shelf life. As compare to eating cucumbers, pickling cucumbers tend to be shorter, thicker, less regularly-shaped, and have rough skin with tiny white- or black-dotted spines. They are not at all waxed. Color can be different from creamy yellow to pale or dark green. Pickling cucumbers are sometimes sold fresh as "Kirby" or "Liberty" cucumbers. The pickling practice removes or degrades a large amount of the nutrient content, particularly that of vitamin C. Pickled cucumbers are waterlogged in vinegar or brine or a combination, often along with a mixture of spices.

• English cucumbers can cultivate as long as 2 feet. They are nearly seedless and are sometimes marketed as "Burp less."
• Japanese cucumbers (kyūri) are mild, deep green, slenderand have a bumpy, ridged skin. They can be used for slicing, pickling, salads, etc., and are available year-round.
• Mediterranean cucumbers are smooth-skinned, small and mild. Like the English and Mediterranean cucumbers are nearly seedless.

Java
Java (Javanese, Indonesian, and Sundanese: Jawa) is an land mass of Indonesia and the place of its capital city, Jakarta. Once the centre of controlling Hindu kingdoms and the heart of the colonial Dutch East Indies, Java now plays a governing role in the money-making and supporting life of Indonesia. With a population of 124 million, it is the most heavily populated island in the world; it is also one of the most thickly populated regions on Earth.
Java shaped mostly as the result of volcanic events, Java is the 13th leading island in the world and the fifth major island of Indonesia. A sequence of volcanic mountains forms an east-west spine along the island. It has three main languages, and most populace are bilingual, with Indonesian as their second language. While the popular of Javanese are Muslim (or at least supposedly Muslim), Java has a different mixture of religious beliefs and cultures.

Fashionable watches

At the end of the 20th century, Swiss watch makers were seeing their sales go down as analog clocks were considered unfashionable. They joined forces with designers from many countries to reinvent the Swiss watch. The result was that they could considerably decrease the pieces and production time of an analog watch. In fact it was so cheap that if a watch broke it would be cheaper to fling it away and buy a new one than to repair it. One of these Swiss watch manufacturers in progress a new brand, Swatch, and called graphic designers to revamp a new annual collection.

Light Arrester

In telegraphy and telephony a lightning arrester is to be found where wires enter a structure, preventing harm to electronic instruments within and ensuring the protection of individuals near them. Lightning arresters, also called rush protector, are devices which are linked between each electrical conductor in a power and transportation systems and the earth. These provide a short circuit to the earth that is interrupted by a non-conductor over which lightning jumps. Its function is to limit the rise in voltage when a connections or power line is struck by lightning.

The non-conducting substance may consist of a semi-conducting material like silicon carbide or zinc oxide, or a spark gap. Primitive varieties of such flash gaps are simply open to the air, but more modern varieties are filled with dry gas and provided with a little amount of radioactive material to support the gas to ionize when the voltage across the gap reaches a particular level. Other designs of lightning arresters use a glow-discharge tube associated between the protected conductor and ground, or any one of a many of voltage-activated solid-state switches called varistors or MOV's.

Lightning arresters built for substation use are consisting of a porcelain tube several feet in length and several inches in diameter, impressive devices, fill with disks of zinc oxide. A safety port is full on the side of the device to vent the occasional internal explosion without shocking the porcelain cylinder.

Hardware

Hardware is the general name that is used to express physical body of a technology.It can be apparatus such as keys, hinge, locks, latches, wire, handles, corners, shackles, plumbing supplies, tools, cutlery, utensils, and machine parts, mainly when they are made of metal. In the United States, hardware has been customarily sold in hardware stores.Although often used interchangeably to mean "hand tools," hardware in olden times referred to the metal bits that were used to make wooden products stronger, more useful, and easier to build/assemble than if they did not have the benefit of metal fittings.

In a looser logic, hardware can be a major military equipment, or electronic equipment, or computer equipment. On the other hand, people don't talk about computer stores as "hardware supplies".In vernacular context, the term refers to trophies and other physical representations of award. The term "hardware" is used to specifically mean material or tangible parts of the computer when used in the context of computer systems and when compared to non-physical software running on the computer. Example: the CPU

Cultural differences of Love

Cultural differences make any worldwide definition of love hard to establish. Expressions of love may incorporate the love for a soul or mind, the love of laws and organizations, love for a body, love for natural world, love of food, love of money, love for learning, love of power, love of fame, love for the respect of others, etc. Different people place varying degrees of importance on the types of love they be given. Love is basically an abstract concept, easier to know-how than to make clear. Because of the difficult and non figurative nature of love, discourse on love is commonly reduced to a thought-terminating cliché, and there are a number of general proverbs concerning love, from Virgil's "Love conquers all" to The Beatles' "All you need is love".

Accumulator

In a computer CPU, an accumulator is a register in which intermediary arithmetic and logic results are stored. Without a register like an accumulator, it would be necessary to write the result of each calculation (addition, multiplication, shift, etc.) to main memory, possibly only to be read right back again for use in the next operation. Access to main memory is slower than access to a register like the accumulator because the technology used for the huge main memory is slower (but cheaper) than that used for a register.

The canonical example for accumulator use is adding a list of numbers. The accumulator is initially set to zero, then each number in spin is added to the value in the accumulator. Only when all numbers have been added is the result seized in the accumulator written to main memory or to another, non-accumulator, CPU register.

Abstract art

Abstract art is now usually understood to mean art that does not depict objects in the natural world, but instead uses colour and form in a non-representational way.In the very early 20th century, the term was more often used to describe art, such as Cubist and Futurist art, that depicts real forms in a simplified or rather reduced way—keeping only an allusion of the original natural subject. Such paintings were often claimed to capture amazing of the depicted objects' immutable intrinsic qualities rather than its external appearance. The more precise terms, "non-figurative art," "non-objective art," and "non-representational art" avoid any possible ambiguity.

Solar System

Solar System consists of the Sun and the other space objects gravitationally bound to it: the eight planets, their 162 known moonsthree currently recognized dwarf planets (including Pluto) and their four known moons, and billions of small bodies. This last group includes asteroids, Kuiper belt objects, comets, meteoroids and interplanetary dust.

In wide terms, the charted regions of the Solar System consist of the Sun, four terrestrial inner planets, an asteroid belt composed of small rocky bodies, four gas giant outer planets, and a second belt, called the Kuiper belt, collected of icy objects. Beyond the Kuiper belt lies the scattered disc, the heliopause, and eventually the hypothetical Oort cloud.

In sort of their distances from the Sun, the planets are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. Six of the eight planets are in turn orbited by natural satellites, usually termed "moons" after Earth's Moon, and each of the outer planets is encircled by planetary rings of dust and other particles. All the planets apart from Earth are named after gods and goddesses from Greco-Roman mythology. The three dwarf planets are Pluto, the largest known Kuiper belt object; Ceres, the largest object in the asteroid belt; and Eris, which lies in the scattered disc.

Blue rose

Since roses lack a gene to create delphinidin, the primary plant pigment that produces true blue flowers, blue roses were usually created by dyeing white roses. So-called "blue roses" have been breed by conventional hybridization methods, but the results, such as "Blue Moon" are more precisely described as lilac in color. However, after 13 years of joint research by an Australian company Florigene, and Japanese company Suntory, a blue rose was formed in 2004 by genetic engineering. The delphinidin gene was cloned from the petunia and inserted into a mauve-blend rose, the Old Garden Rose 'Cardinal de Richelieu.' (a Rosa gallica) However, since the pigment cyanidin was still present, the rose was more dark burgundy than true blue. Further work on the rose using RNAi technology to depress the production of cyanidin produced a very dark mauve plant, with only trace amounts of cyanidin.

Blue roses conventionally signify mystery or attaining the impossible. They are supposed to be able to grant the owner youth or grant wishes. This symbolism derives from the rose's meaning in the language of plants common in Victorian times.

Cotton

Cotton is a soft fibre that grows around the seeds of the cotton plant , a shrub native to tropical and subtropical regions around the world, with the Americas, India, and Africa. However, virtually all of the commercial cotton grown today worldwide is grown from varieties of the native American species Gossypium hirsutum and Gossypium barbadense. The fibre is most often spun into thread and used to make a soft, breathable textile, which is the most widely used natural-fibre cloth in clothing today. The English name derives from the Arabic word al qutun, meaning "cotton fiber".
Cotton fibre, once it has been processed to remove seeds and traces of wax, protein, etc., consists of nearly pure cellulose, a natural polymer. Cotton manufacture is very efficient, in the sense that ten percent or less of the weight is lost in following processing to convert the raw cotton bolls into pure fibre. The cellulose is arranged in a way that gives cotton fibres a high degree of strength, durability, and absorbency. Each fibre is made up of twenty to thirty layers of cellulose coiled in a neat series of natural springs. When the cotton boll is opened, the fibres dry into flat, twisted, ribbon-like shapes and become kinked together and interlocked. This interlocked form is ideal for spinning into a fine yarn.

Abstract art

Abstract art is now usually understood to mean art that does not depict objects in the natural world, but instead uses colour and form in a non-representational way.In the very early 20th century, the term was more often used to describe art, such as Cubist and Futurist art, that depicts real forms in a simplified or rather reduced way—keeping only an allusion of the original natural subject. Such paintings were often claimed to capture amazing of the depicted objects' immutable intrinsic qualities rather than its external appearance. The more precise terms, "non-figurative art," "non-objective art," and "non-representational art" avoid any possible ambiguity.

Oily fish

Oily fish are those fish which have oils throughout the fillet and in the belly cavity around the gut, rather than only in the liver like white fish. Oily fish fillets may contain up to 30 percent oil, although this figure varies both within and between species. Oily fish generally swim in mid-waters or near the surface
Oily fish are a good source of Vitamins A and D as well as being rich in Omega 3 fatty acids. For this reason the consumption of oily fish has been identified as more beneficial to humans than white fish. Amongst other benefits, studies suggest that the Omega 3 fatty acids in oily fish may help sufferers of depression, reduce the likelihood of heart disease and improve inflammatory conditions such as arthritis.

Pollarding

Pollarding is a woodland management method of hopeful lateral branches by cutting off a tree stem or minor branches two metres or so above ground level. The tree is given a year to regrow, after the first cutting, but once begun, pollarding requires annual maintenance by pruning. This will ultimately result in somewhat expanded (or swollen) nodes topping the tree trunk with multiple new side and top shoots growing from it.
A tree that has been pollarded is known as a pollard. A tree which has not been pollarded is called a maiden or maiden tree; which also refers to the fact that pollarding is usually first undertaken when the tree is quite young. Pollarding older trees typically result in the death of the tree. Pollarding is sometimes abused in attempts to curb the growth of older or taller trees. However, when performed properly it is useful in the practice of arboriculture for tree management.

Malai

Malai is a South Asian term for clotted cream or Devonshire cream. It is made by heating non-homogenized whole milk to about 80ºC (180ºF) for about one hour and then allowing to cool. A thick yellowish layer of fat and coagulated proteins forms on the surface, which is skimmed off. The process is typically repeated to remove most of the fat. Malai has about 55% butterfat. Buffalo milk is thought to produce better malai because of its high fat content.Malai is used in such recipes as Malai Kofta dumplings and the sweet Malai Kulfi.

Mango

The mango is a tropical fruit of the mango tree. Mangoes belong to the genus Mangifera which consists of about 30 species of tropical fruiting trees in the flowering plant family Anacardiaceae. The exact origins of the mango are unknown, but most believe that it is native to Southern and Southeast Asia including the Philippines, Indonesia, India, Burma, Sri Lanka, Pakistan and Bangladesh owing to the wide range of genetic diversity in the region and fossil records dating back 25 to 30 million years.
Mangos retain a special significance in the culture of South Asia where they have been cultured for millennia. It has been the national symbol of the Philippines. Reference to mangoes as the "food of the gods" can be found in the Hindu Vedas and the leaves are ritually used for floral decorations at Hindu marriages and religious ceremonies.

Hyphy

Hyphy is a style of music and dance primarily associated with the Bay Area hip hop culture. Although the hyphy movement started in the early '90s, it began to emerge in the early 2000s as a response from Bay Area rappers next to commercial hip hop for not acknowledging the Bay for setting trends in the hip hop industry.Although the "hyphy movement" has just newly seen light in mainstream America, it has been a long standing and evolving culture in the Bay Area. Bay Area rapper Keak Da Sneak takes credit for coining the term when, as a young boy, his mother would often tell him he was hyperactive. He would repeat the word "hyper" as "hyphy".

Hyphy music is illustrious by gritty, pounding rhythms and in this sense can be associated with the Bay Area as crunk music is to the South; however, contrary to popular belief, the musical aspect of the Hyphy movement has very few similarities to crunk music as it is dictated by more up-tempo beats. An individual is said to "get hyphy" when they act or dance in an overstated and ridiculous manner. Those who consider themselves part of the Hyphy movement would describe this behavior as acting "stupid" or "going dumb." In contrast to much of popular American culture where these phrases would be considered negative or even insulting, Hyphy is illustrious by taking this kind of behavior as a form of pride

Chocolate

Chocolate comprises a number of raw and processed foods that create from the seed of the tropical cacao tree. It is a common ingredient in many kinds of confections such as chocolate bars, candy, ice cream, cookies, cakes, pies, chocolate mousse, and other desserts. It is one of the most popular flavours in the world.
Chocolate was shaped by the Mesoamerican civilization, from cacao beans, and cultivated by pre-Columbian civilizations such as the Maya and Aztec, who used it as a basic part in a variety of sauces and beverages. The cocoa beans were ground and mixed with water to create a variety of beverages, both sweet and bitter, which were kept for only the highest noblemen and clerics of the Mesoamerican world. Chocolate is made from the fermented, roasted, and ground beans taken from the pod of the tropical cacao tree, Theobroma cacao, which was native to Central America and Mexico, but is now cultivated all through the tropics. The beans have an intensely flavoured bitter taste. The resultant products are known as "chocolate" or, in some parts of the world, cocoa.

Scientific Methods

The scientific method seeks to explain the complexities of nature in a replicable way, and to use these explanations to construct useful predictions. It provides an objective method to find solutions to problems in a number of scientific and technological fields. Often scientists have a predilection for one outcome over another, and scientists are conscientious that it is vital that this preference does not bias their interpretation. A strict following of the scientific method attempts to minimize the pressure of a scientist's bias on the outcome of an experiment. This can be achieved by correct experimental design, and a thorough peer assessment of the experimental results as well as conclusions of a study.

Scientists use models to refer to a explanation or depiction of something, specifically one which can be used to construct predictions that can be tested by experiment or observation. A hypothesis is a disputation that has been neither well supported nor yet ruled out by experiment. A theory, in the context of science, is a logically self-consistent model or framework for recitation the behavior of certain natural phenomena. A theory typically describes the behavior of much broader sets of phenomena than a hypothesis — commonly, a large number of hypotheses may be logically bound together by a single theory. A physical law or law of nature is a scientific generalization based on a adequately large number of empirical observations that it is taken as fully verified.

Solar System

solar system consists of the Sun and the supplementary celestial objects gravitationally bound to it: the eight planets, their 162 known moons,three at present recognized dwarf planets (including Pluto) and their four known moons, and billions of small bodies. This last category includes asteroids, Kuiper belt objects, comets, meteoroids and interplanetary dust.
In broad terms, the charted regions of the Solar System consist of the Sun, four terrestrial inner planets, an asteroid belt composed of small rocky bodies, four gas giant outer planets, and a second belt, called the Kuiper belt, collected of icy objects. Beyond the Kuiper belt lies the dotted disc, the heliopause, and ultimately the hypothetical Oort cloud.

Butter cream

Butter cream or buttercream or mock cream is a type of icing used in cakes, as a coating, and as decoration. In its simplest form, it is made by creaming butter with icing sugar, though other fats can be used, such as margarine or even avocado. Colourings and flavorings are often added, such as cocoa powder or vanilla extract.
A notable use of buttercream is in butterfly cakes, though it is popular as a topping for many other forms of Victoria sponge.

Bonneville Dam

100 Bonneville Lock and Dam consists of a number of dam structures that together whole a span of the Columbia River between the US states of Oregon and Washington at River Mile 146.1. The dam is situated 40 miles east of Portland, Oregon, in what is now the Columbia River Gorge National Scenic Area. The main functions of Bonneville Lock and Dam are those of electrical power generation and river navigation. The dam was built and is managed by the US Army Corps of Engineers. Electrical power generated at Bonneville is spread by the Bonneville Power Administration. Bonneville Lock and Dam are named for Army Capt. Benjamin Bonneville, an early explorer endorsed with charting much of the Oregon Trail. The name is marked BAH-nee-vill.

History
The unusual structures: a lock and powerhouse constructed on the south side of Bradford Island and a spillway on the north side were built by the Army Corps of Engineers during the New Deal—started in 1933 and finished in 1937. Prior to this damming of the river, a set of locks that were opened in 1896 moved ships around Cascades Rapids, situated several miles upstream of Bonneville. Both the cascades and the old lock structure were submerged by Lake Bonneville, the tank that formed behind the dam. The original navigation lock at Bonneville was opened in 1938 and was, at that time, the biggest single-lift lock in the world.

Dimensions and statistics

Aerial view of spillway flanked by powerhouses, Bonneville Lock and Lake Bonneville beyond First Powerhouse – Constructed in 1933-37; 313 m long; 10 generators with an output capacity of 526,700 kW.
Spillway – Constructed 1933-37; 18 gates over a length of 442 m; maintains the reservoir usually 18 m above the river on the downstream side;
Second Powerhouse – Constructed 1974-81; 300.5 m long; 8 generators with a total generating capacity of 558,200 kW.
Bonneville Lock – Constructed in 1993 at a cost of $341 million; 26 m wide, 206 m long; transit time is approx. 30 minutes.
Lake Bonneville – 77 km long reservoir on the Columbia River created by Bonneville Dam; part of the Columbia-Snake Inland Waterway.